Pineido Studio

Pineido Studio manual

From the first time you open it on the stick to every setting, shown on the app’s own screens.

Updated

In this manual

What you need

Pineido Studio is a private AI app that runs on your own computer, from the Pineido stick. You need no account.

What you need

The stick and a computer with Windows 10 or 11, 64-bit, with free space and enough memory for the models you choose, and the internet once, to download them. Your computer’s processor, graphics and memory run the models; the stick carries the app.

The models

No AI models are included. You download the ones you choose while you create the Brain. They are kept on this computer, and the Welcome view says in which folder. Settings › Brain › “Change location…” moves them.

Your first minutes

From plugging in the stick to your first answer, on the app’s own screens. The clips below show more of it in motion, without sound and with captions.

  1. Plug in the stick and open “Start-Pineido” on it (or “Pineido-Studio”). Nothing is installed on your computer: the app runs from the stick you bought. Started from the stick, Windows asks nothing first.

  2. The first window can take up to a minute to appear. That is normal: do not start it twice.

  3. On the Welcome screen, choose the interface language, then tick both Terms of Use boxes. Continue stays blocked until both are ticked.

  4. Create the Brain: one row for each part (chat, vision, pictures, voice and more), each marked “Found on this computer” or to be downloaded. Choose “✨ Best for my PC”, or “Review part by part”, then Create.

  5. The models you chose are then downloaded. Airplane mode is on, so Pineido asks first: “Go online for the model library?”, with what it will do, where it connects and what it sends. “Allow until I close the app” lets the download through.

    The question “Go online for the model library?”: airplane mode is on; what: a model download; where: the model library (registry.ollama.ai); sends: only what is needed for this action, nothing else; and the buttons Allow until I close the app, Always allow the model library, and Stay offline
  6. If Create asks you to choose a chat brain first, open Brain (chat), set the filter to “Already here”, press “Use this” on a model, and press Create again.

  7. A short setup tour follows: your name, your assistant, its personality and voice, privacy, and more. “Skip setup” is there on every step, and Settings › Appearance › “Replay the setup tour” runs it again later.

  8. Then the chat opens. Type what you want in plain words and send it. Your assistant shows each step as it works, and answers on your computer.

    The chat with Juniper: its steps, from Selecting the right models to 1/1 write it, then three discussion questions about a mystery novel for the Maple Street book club, with Web off beside the chat box
  • Your first question Ask a first question with the Web off. The answer is worked out and written on your own computer. 0:30, no sound, captions on

    Captions: A first question, with the Web off. Type what you want in plain words, then send. Juniper works out how best to help, on this computer. It shows each step as it works. The answer: three questions for the book club.

  • Web on, web off Turn web access on, then off again. One switch, and airplane mode comes back on. 0:15, no sound, captions on

    Captions: Settings › Privacy & Web: airplane mode is on and web access is off, by default. Tick Allow web access: airplane mode goes off, and Pineido can search and read the web. Untick it, and airplane mode is back on.

  • Tip: ask about a file Name a file in your workspace, and Juniper reads it right on your computer, then tells you what it says. 0:30, no sound, captions on

    Captions: Tip: name a file in your workspace. Ask for its items in short points, only what the file says. Juniper works out how best to help, on this computer. It reads agenda.pdf on this computer. Then it tells you what the file says.

The stick

Pineido Studio lives on the stick. Keep it there.

Run it from the stick

Open Pineido Studio from the stick every time. A copy taken off the stick does not start: it shows “Pineido can’t start from this drive” (see Troubleshooting).

The legal texts

The stick carries the Terms (TERMS.md), the privacy policy (PRIVACY.md), the licence notices (NOTICES.md) and the source offer (SOURCE-OFFER.txt) at its top level, beside a Compliance folder.

Taking it out

Quit Pineido Studio first, then eject the stick the way Windows ejects any drive.

Name your AI and give it a face

The setup tour’s second step, “Meet your AI”. The picture is made on your own computer.

  1. Type a name for your assistant. It shows at once in the chat preview on the right.

  2. Describe its picture in a few words and press “Generate picture”. The picture model may read your words loosely: edit the description and generate again for another. Or press “Upload…” to use your own picture, or “Logo”.

    Setup step Meet your AI, step 2 of 13: the assistant named Juniper, its picture made from a short description, Generate picture, Upload… and Logo, a picture for you below, and a preview chat with Juniper on the right
  3. Change any of it later in Settings › Assistant › Name: “Change…”, “🎨 Generate picture” or “Reset”.

Choose what goes online

Airplane mode is on from the start. Pineido Studio asks before it connects, and says what for.

  1. When something needs the internet, such as the model library, Pineido asks first: “Go online for the model library?”. It shows what it will do, where it connects and what it sends.

  2. “Allow until I close the app” allows it for this session, “Always allow the model library” every time, and “Stay offline” allows nothing. Each request is written to the activity ledger.

  3. The tour’s “Privacy & connectivity” step leaves internet access off. The extras below it are ticked so everything works from the start: “Save chat history”, “Let the assistant run programs” and “Let the assistant use your computer”. Untick any you do not want.

  4. Change them later: Settings › Privacy & Web for chat history and connectivity, Settings › Advanced › Agent and Computer use for the other two.

Ask in plain words

Type what you want in the chat box and send it. Pineido picks the model for each step, and saves what it makes in your workspace folder, listed under “Made in this chat” with Open and Show in folder.

Write something

For example: “Write a two-sentence welcome note for the book club.” A piece it writes may also be saved as a text file in your workspace.

Make a picture

For example: “Make a picture of a red fox reading a book.” It is made on your computer and saved as a file.

Describe a picture

Name a picture in your workspace: “Describe picture.png.”

Make or read a PDF

“Save the welcome note as a PDF named welcome.pdf”, or “What does welcome.pdf say?”

Read the text in an image

For a scan or a photo of a page: “Read the text in scan.png.”

Transcribe a recording

“Transcribe recording.wav.” A small hearing model can mishear a word now and then, so read the transcript through.

Read aloud

“Read welcome_note.txt aloud.” Pineido says it out loud.

Find files

“Which files in my workspace mention the garden club?” For now it searches the text in text files; it does not find words inside pictures or recordings.

The buttons by the chat box

Attach a file, talk with the microphone, and have replies spoken.

What it can do depends on the models

Each task needs its part of the Brain: pictures need a picture model, such as a Stable Diffusion 1.5 or SDXL model, photos a vision model such as InternVL, transcripts a hearing model. Running the big chat model together with picture models on a 48 GB Mac is untested until a memory fix lands. AI output can be wrong: check what matters.

Settings

Open Settings with the gear. It has eight tabs.

Assistant

Name, Your name, ready-made personalities, “Personality / system prompt” with “✨ Improve”, and Greeting. Under Responses: Word variety, Min probability, Repetition guard, Response length, Memory (how much of the chat it keeps in mind), Seed, Show the model thinking, and Quick answers for simple prompts, with “Reset to defaults”.

Brain

Your models and complete stacks: each part of the brain and the model that does it, “Best for my PC” to fit the whole brain to this computer in one press, “Change location…”, “Add your own models / LoRAs…”, “+ Add a model of your own”, the Models list, and “🧠 Get more brains”.

Appearance

UI language, the theme, Text size, Font, Bubble roundness and Animations, “Reset to Pineido”, and “Replay the setup tour”. UI language relabels the app; the language the assistant replies in is set under Voice.

Voice

Language (the assistant replies in your language), AI voice, Speaking speed with “▶ Preview voice”, Microphone with “🎙 Test microphone”, Listening mode, Wake word (the name you gave your assistant), and “Train its name to your voice”.

Privacy & Web

Save chat history, “Delete all saved chats”, “Export backup…” and “Import backup…”; Drive lock; “⚠ Panic wipe now”; Connectivity: “✈ Airplane mode” (on by default) and “Allow web access”, the same switch seen from the other side, “View connection log” and “Forget web-access grants”; where Pineido keeps your things; and Updates.

Settings, the Privacy & Web tab: under Connectivity, Airplane mode ticked and on by default, Allow web access unticked, and View connection log below
Memory

“What I remember”: the facts it keeps from your chats, empty on a new stick, and “Forget everything”.

Performance

“▶ Run speed test”, “Delete the downloaded models”, “Run the models on” (the processor or the graphics card), Speculative decoding and Lazy-grammar tool calls (both off by default), and “🪲 Open the debug log”.

Advanced

Search & memory (the embedding model, Auto-remember facts from chats, Index chats & notes into the Archive and more), the Skill Library, Storage, Agent (“Let the assistant run programs”), “Let the assistant use your standard folders”, Computer use (“Let the assistant use your computer”, Permission mode, Dry run, App allow-list), Automation (reminders, nudges, the daily briefing, quiet hours, and the Local control API, off by default), and Tool servers (MCP).

Your standard folders

“Let the assistant use your standard folders” is on by default: Desktop, Documents, Downloads, Pictures, Music and Videos are open to the assistant without a question. Turn it off in Settings › Advanced if you would rather it asked.

Lock the stick with a PIN

Settings › Privacy & Web › Drive lock. It is optional, and the tour offers it as its last step.

  1. Under “Lock with”, choose a PIN (numbers) or a password, type it in “New PIN” and again in “Type it again”.

  2. Tick “I have written it down. I understand it cannot be recovered.”, then press “Lock this drive”.

There is no way back in without it

No reset, no recovery code and no master key. Write the PIN down and keep it apart from the stick.

Updates

Settings › Privacy & Web › Updates shows the version you have and “Check for updates”.

Only on your stick

Pineido updates only on the genuine stick it was made on. Every update is signed by Pineido and checked before it is applied, and it never touches your models, encryption, chats or keys.

When it checks

With the Web on, it checks for a new version shortly after it starts; untick “Check for updates automatically at launch (only when Web is on)” to stop that. While airplane mode is on it never checks by itself, and the button asks before it connects. Nothing is downloaded until you choose to install it.

For two years

Updates come for two years from delivery. Installing them is your choice.

Buying and refunds

Pineido Studio costs $20, VAT included and shipping not included, and comes as a physical USB stick. Send the order request on the Pineido Studio page and we reply by email with delivery and payment.

On top of the price

Delivery. Import duties, other charges on delivery and your payment provider’s charges are yours too.

14 days to change your mind

You may withdraw within 14 days from the day you receive the stick, with no reason needed, and get back what you paid. That right ends once the seal on the stick’s packaging is broken.

How to withdraw

Write to the address at the top of the Terms, or email [email protected]. The model withdrawal form at the end of the Terms may help, but you do not have to use it.

Troubleshooting

“Pineido can’t start from this drive”

The app was copied off its stick, or the stick’s files are damaged. Run it from the stick you bought and press “Try again”. If this is your stick and it still shows, write to us.

The screen “Pineido can’t start from this drive”: Pineido could not verify this drive, the buttons Buy Pineido and Try again, and the line: plug in and run Pineido straight from the stick you bought
Nothing shows after I open it

Pineido Studio prepares itself from the stick each time it starts, and its window can take up to a minute to appear. Wait for it, and do not start it twice.

“Couldn’t start the engine” or “Something went wrong”

Press “Try again”.

“Updates work only on a genuine Pineido drive…”

You are not running Pineido Studio from your own stick. Open it from the stick and check again.

“Nothing was downloaded: going online was not allowed”

You chose “Stay offline”, or airplane mode is on. Turn on Settings › Privacy & Web › “Allow web access” to download the models, then turn airplane mode back on.

The microphone keeps listening

Turn off Settings › Voice › Listening mode and Wake word.

Forgot the drive-lock PIN

There is no recovery, no reset and no backdoor.

Start over and delete everything

Settings › Privacy & Web › “⚠ Panic wipe now”, type WIPE, then press Panic wipe. Your chats, memory and workspace files are deleted and the app returns to the Welcome screen. The downloaded models and the legal texts on the stick are kept. It cannot be undone.

Privacy

Pineido Studio runs on your own computer. There is no account, no telemetry, no tracking and no cloud.

It goes online only when you allow it: to download models, or the Web when you turn it on. While the Web is on, it asks the update address whether a newer version exists, and that request carries none of your data. Settings › Privacy & Web › “View connection log” lists what connected.

The privacy policy

It is on the stick, as PRIVACY.md, beside the Terms.

Contact

Questions about your stick, an order or a refund: write to us.

ByFounder and Imaginator

Pineido, based in Strumica, North Macedonia, is a software company that builds websites, online shops, web and mobile apps, business automation and AI for companies at home and abroad. Work ships in 30-day sprints at a fixed price, and the client owns the code.

Published